Combination of membrane processes for desulfation of seawater used for injection in oil fields

Seawater is commonly used in offshore platforms as an injection fluid in secondary oil recovery. However, the sulfate found in seawater has been the cause of many inconveniences, such as the formation of precipitates, which can settle in various parts of the production platform. Nowadays, nanofiltration (NF) is used in sulfate removal units for seawater desulfation, where cartridge filters are commonly used for seawater pretreatment. Suspended solids and microorganisms that have not been retained by the filtration system may deposit on the surface of NF membranes, decreasing system productivity and reducing membrane life. The microfiltration (MF) process can be used as an alternative pretreatment and would allow the removal of these elements. In this study, a combined process of MF and NF for seawater desulfation was developed for injection into oil reservoirs. Permeation modules containing hollow fiber shaped poly (imide) membranes were used in the construction of an MF pilot system, integrated with an NF pilot system similar to those already used on platforms. The performance of the systems was evaluated by monitoring the permeability of both during seawater filtration. Parameters such as degree of water recovery, frequency, and efficiency of backwash procedures and chemical cleaning were also studied. The results showed that MF seawater pretreatment is an effective alternative for NF desulfation. (author)