Design/Installation and Structural Integrity assessment of Bethel Valley Low-Level Waste Collection and Transfer System upgrade for Building 2649 (Transported Waste Receiving Facility) at Oak Ridge National Laboratory

This document presents a Design/Installation and Structural Integrity Assessment for a new tank system for portions of the Bethel Valley Low Level Waste (LLW) System, located at the Oak Ridge Reservation, Oak Ridge, Tennessee. This issue of the assessment covers the design aspects of the new tank system, and certifies that the design has sufficient structural integrity and is acceptable for the storing or treating of hazardous and/or radioactive substances. This document will be reissued at a future data and will then include the assessment of the installation of the new tank system. The present issue identifies specific activities that must be completed during the fabrication, installation, and testing of the new tank system in order to provide assurance that the final installation complies with governing requirements. These requirements are based on meeting the intent of 40 CFR264 Subpart J - Tank Systems, as set forth in Appendix F to the Federal Facility Agreement, Docket No. 89-04-FF, covering the Oak Ridge Reservation. The assessment presented in this document is responsive to the Environmental Restoration Agreement for the Oak Ridge Reservation. The format utilized on preparation of the document follows the format presented in Appendix F, Low Level Radioactive Waste Tank Systems, appended to the Agreement