Published February 2004 | Version v1
Journal article Metadata-only

Sintering of Bi-Tl, Bi-In, Bi-Pb, and Hg-In contacts

Creators

  • 1. Ural'skij Gosudarstvennyj Tekhnicheskij Univ. - UPI, Ekaterinburg (Russian Federation)

Description

By means of autothermoelectromotive force one measured contact temperature during sintering of specimens of Bi-Tl, Bi-In, and Bi-Pb systems. During sintering one observes heat-up of contact by fractions of degree being twice as large as contact temperature increase. Specimens of Hg-Tl and Hg-In systems were subjected to contacting. The phase diagrams of both systems shows congruently melting intermetallic compounds. Within Hg-In system sintering occurs at thermostat temperature by 15 Deg C below the minimum temperature in the liquids curve

Abstract (Russian)

Методом автотермо-э.д.с. измерена температура контакта. При спекании образцов систем Bi-Tl, Bi-In и Bi-Pb. В процессе спекания происходит разогрев контакта на доли градуса, что более чем на два порядка превышает возрастание температуры контакта. Проведено контактирование образцов систем Hg-Tl и Hg-In. На диаграммах состояния обеих систем присутствуют конгруэнтно плавящиеся интерметаллиды. В системе Hg-In спекание происходит при температуре на 15 град С ниже минимальной температуры на кривой ликвидуса

Additional details

Additional titles

Original title (Russian)
Spekanie obraztsov sistem Bi-Tl, Bi-In, Bi-Pb, Hg-In

Publishing Information

Journal Title
Neorganicheskie Materialy
Journal Volume
40
Journal Issue
2
Journal Page Range
p. 191-195
ISSN
0002-337X
CODEN
NEOMB8

INIS

Country of Publication
Russian Federation
Country of Input or Organization
Russian Federation
INIS RN
36079539
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
BISMUTH; INDIUM; INTERMETALLIC COMPOUNDS; MELTING POINTS; MERCURY; PHASE DIAGRAMS; SINTERING
Descriptors DEC
ALLOYS; DIAGRAMS; ELEMENTS; FABRICATION; INFORMATION; METALS; PHYSICAL PROPERTIES; THERMODYNAMIC PROPERTIES; TRANSITION TEMPERATURE

Optional Information

Notes
15 refs., 2 figs., 1 tab.