Measurement and calculation of neutron densities in BWR high burn-up fuels

A neutron-scanning device was developed for measuring accurate neutron densities of BWR high burn-up fuels up to 65 GWd tU-1. Characteristic test of this device was done with a 252Cf source and adopted to measure axial distributions of neutron densities of BWR spent fuels with various enrichments (2.0-3.4%), which had been irradiated up to 60 GWd tU-1 at Fukushima Daini Nuclear Power Station Unit 2(2F-2). We found the measured neutron densities were proportional to about fourth power of the corresponding burn-up values. The neutron densities calculated by the ORIGEN2.1 code and various cross section libraries showed good agreements with the measured ones in profile and absolute value except for BWR-UE file mainly based on ENDF/B-IV. The BS240J32 library based on JENDL3.2 was the best among the investigated libraries