Published May 25, 2008 | Version v1
Journal article

On the evaluation of temperature dependence of elastic constants of martensitic phases in shape memory alloys from resonant ultrasound spectroscopy studies

  • 1. Institute of Thermomechanics Academy of Sciences of the Czech Republic, Dolejskova 5, Prague 8, CZ 182 00 (Czech Republic)
  • 2. Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Trojanova 13, Prague 2, CZ 120 00 (Czech Republic)
  • 3. Institute of Physics Academy of Sciences of the Czech Republic, Na Slovance 2, Prague 8, CZ 182 21 (Czech Republic)

Description

Elastic constants of austenite and martensite phases in shape memory alloys reflect fundamental thermodynamic properties of these materials-i.e. important physical information can be deduced not just from the values of the constants but, mainly from their temperature and stress dependencies. As regards to the parent austenite phase, such information is available in the literature for most of the known shape memory alloys. For the martensitic phases, however, only few reliable experimental data exist, due to the experimental difficulties with the preparation of martensite single crystals as well as due to the difficulties with the ultrasonic measurement of elastic properties of strongly anisotropic media with low symmetry. In this work, the temperature dependence of all elastic constants of cubic austenite and orthorhombic 2H martensite phases in Cu-Al-Ni alloy determined by resonance ultrasound spectroscopy (RUS) is reported. Experimental and theoretical improvements of the RUS method which had to be made to perform the successful measurements on strongly anisotropic and martensitic phases are discussed

Availability note (English)

Available from http://dx.doi.org/10.1016/j.msea.2006.12.224

Additional details

Identifiers

DOI
10.1016/j.msea.2006.12.224;
PII
S0921-5093(07)01158-6;

Publishing Information

Journal Title
Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
Journal Volume
481-482
Journal Page Range
p. 567-573
ISSN
0921-5093
CODEN
MSAPE3

Conference

Title
7. European symposium on martensitic transformations
Acronym
ESOMAT 2006
Dates
10-15 Sep 2006
Place
Bochum (Germany)

INIS

Country of Publication
Netherlands
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
40025451
Subject category
S36: MATERIALS SCIENCE;
Resource subtype / Literary indicator
Conference
Descriptors DEI
ALUMINIUM ALLOYS; ANISOTROPY; AUSTENITE; COPPER ALLOYS; CUBIC LATTICES; ELASTICITY; MARTENSITE; MONOCRYSTALS; NICKEL ALLOYS; ORTHORHOMBIC LATTICES; PHASE TRANSFORMATIONS; SPECTROSCOPY; STRESSES; TEMPERATURE DEPENDENCE; THERMODYNAMIC PROPERTIES
Descriptors DEC
ALLOYS; CARBON ADDITIONS; CRYSTAL LATTICES; CRYSTAL STRUCTURE; CRYSTALS; IRON ALLOYS; MECHANICAL PROPERTIES; PHYSICAL PROPERTIES; TRANSITION ELEMENT ALLOYS

Optional Information

Copyright
Copyright (c) 2007 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.