Effects of hydrothermal treatments on destruction of per- and polyfluoroalkyl substances in sewage sludge

Highlights: • Four thermal treatments led to 100% removal of PFCAs. • The CambiTHP process did not lead to PFAS removal significantly. • All tested thermal treatments did not result in complete removal of PFOS and PFBS. • Treatments with Ca(OH)₂ at 165 or 300 °C for 2 h completely removed PFAA precursors. • The two extraction methods revealed similar PFAS concentrations except PFBS. Sewage sludge has become a sink of per- and polyfluoroalkyl substances (PFAS) due to the ineffectiveness of PFAS removal during conventional activated sludge treatment process. In this study, we evaluated the performance of an enhanced method for PFAS extraction from sewage sludge. Significant matrix effect was observed for samples derived from untreated and hydrothermally treated sludge. Extra steps for removing potential interferences were thus needed to reduce these matrix effects and improve the accuracy of PFAS quantification. Hydrothermal treatment at 165 °C for 0.5/2 h and 250 °C for 0.5 h increased the concentration of extractable PFAAs in treated sludge. Increasing the temperature to 300 °C resulted in complete degradation of PFCAs after hydrothermal processing, but still increased the concentrations of PFSAs and PFAA precursors. The concentration increase could be due to the conversion of PFAA precursors to PFAAs and the release of PFAAs from sewage sludge during thermal treatment. Ca(OH)₂ addition to hydrothermal treatment completely removed PFAA precursors but significantly increased the extractable PFAAs, except PFHpA and PFHxS, at 165 °C and all PFSAs at 300 °C. This study revealed the difficulties in extracting and quantifying PFAS in sludge and demonstrated the need for further research on finding suitable solutions for complete removal or destruction of PFAS in highly heterogeneous sewage sludge.