Published September 2000 | Version v1
Miscellaneous

Effect of temperature on the microstructure and hardness of U3Si2-AI fuel plate with grade of uranium loading 3,6g/cm3

  • 1. Center for Development of Nuclear Fuel and Recyking Technology, National Nuclear Energy Agency, Serpong (Indonesia)

Description

Analysis on microstructure and hardness of U3Si2-AI fuel element plate of 3.6 g/cm3 have been carried out using SEM/EDS hardness tester respectively. The fuel plates of 3.6 g/cm3 uranium loading were heated respectively at 600 oC, 900 oC, and 1400 oC in DITA furnace with in the argon atmosphere. Selection of those temperatures were based on the occurring thermic reaction and the fuel plate that causes phase transformation and new compound formation. Presumably the new compound will affect microstructure and hardness of fuel plate. Therefore it will be analyzed under this experiment the effect of heating temperature against the change of microstructure and hardness of the fuel element. Metallographic preparation was conducted on samples which have been heated in DTA and followed later with analysis on its microstructure and hardness. The result show that in heating temperature of 600 oC interaction between molten AI-matrix and AIMg2 cladding with U3Si2 meat occurred. Molten AI-matrix enclosed U3Si2 meat to from small agglomeration. The higher rise of the heating temperature the bigger agglomeration was formed. While from the hardness analysis, it was shown that the higher rise of heating temperature the lower hardness of fuel plate was found. This microstructure and hardness data of fuel plate is hoped could be used in studying phenomena happened in U3Si2 fuel plate caused by thermic reaction and as an input or manufacturer of research reactor fuel element and manufacturing silicide fuel elements with higher uranium loading. Key words : U3Si2-AI fuel element plate, temperature changes, microstructure, and hardness

Part of:
Proceedings of the Seminar on Nuclear Science and Technology: The Role of Nuclear Science and Technology on Empowering National Potential

Additional details

Additional titles

Original title (Indonesian)
Pengaruh suhu terhadap mikrostruktur dan kekerasan pelat elemen bakar U3Si2-AI dengan tingkat muat uranium 3,6 g/cm3

Publishing Information

Publisher
Center for Research and Development of Nuclear Techniques, National Nuclear Energy Agency
Imprint Place
Bandung (Indonesia)
Imprint Title
Proceedings of the Seminar on Nuclear Science and Technology: The Role of Nuclear Science and Technology Empowering National Potential
Imprint Pagination
651 p.
Journal Page Range
p. 563-573
ISSN
1410-1769

Conference

Title
Conference on the Role of Nuclear Science and Technology on Empowering National Potential
Original Conference Title
Prosiding Seminar Sains dan Teknologi Nuklir Dalam Pemberdayaan Potensi Nasional
Dates
11-12 Jul 2000
Place
Bandung (Indonesia)

INIS

Country of Publication
Indonesia
Country of Input or Organization
Indonesia
INIS RN
34084881
Subject category
S36: MATERIALS SCIENCE;
Resource subtype / Literary indicator
Conference, Non-conventional Literature
Descriptors DEI
AGGLOMERATION; ALUMINIUM; HARDNESS; METALLOGRAPHY; MICROSTRUCTURE; PLANTS; TRANSITION TEMPERATURE; URANIUM SILICATES
Descriptors DEC
ACTINIDE COMPOUNDS; ELEMENTS; MECHANICAL PROPERTIES; METALS; OXYGEN COMPOUNDS; PHYSICAL PROPERTIES; SILICATES; SILICON COMPOUNDS; THERMODYNAMIC PROPERTIES; URANIUM COMPOUNDS

Optional Information

Notes
7 refs.; 1 tabs.; 4 figs.