Natural convection heat transfer from horizontal rod bundles in liquid sodium. Part 2. Correlations for horizontal rod bundles based on theoretical results

Natural convection heat transfer from horizontal rod bundles in N_xm×N_ym arrays (N_xm, N_ym = 5–9) in liquid sodium was numerically analyzed for three types of the bundle geometry (in-line rows, staggered rows I and II). The unsteady laminar two-dimensional basic equations for natural convection heat transfer caused by a step heat flux were numerically solved until the solution reaches a steady state. The PHOENICS code was used for the calculation considering the temperature dependence of thermophysical properties concerned. The surface heat fluxes for each cylinder were equally given for a modified Rayleigh number, R_f, ranging from 0.0637 to 63.1 (q = 1×10⁴ to 7×10⁶ W/m²). S_x/D and S_y/D for the rod bundle, which are the ratios of the distance between center axes on the abscissa and the ordinate to the rod diameter, respectively, were ranged from 1.6 to 2.5 on each bundle geometry. The spatial distribution of Nusselt numbers, Nu, on horizontal rods of a bundle was clarified. The average value of Nusselt number, Nu_av, for three types of bundle geometry with various values of S_x/D and S_y/D were calculated to examine the effect of the array size, S/D and R_f on heat transfer. The bundle geometry for the higher Nu_av value under the condition of S_x/D×S_y/D = 4 was examined by changing the ratio of S_x/S_y. A correlation for Nu_av for the three types of bundle geometry above mentioned including the effects of S_x/D and S_y/D was developed. The correlation can describe the theoretical values of Nu_av for the three types of bundle geometry in N_xm×N_ym arrays (N_xm, N_ym = 5–9) for S_x/D and S_y/D ranging from 1.6 to 2.5 within 10% difference. (author)