Comparison of the results of wide plate tests with the predictions of several fracture concepts
Creators
- 1. Mannesmann-Forschungsinstitut G.m.b.H., Duisburg (Germany, F.R.). Abt. Metallkunde
- 2. Technische Hochschule Aachen (Germany, F.R.). Lehrstuhl und Inst. fuer Eisenhuettenkunde
Description
With the results of wide plate tests on center cracked specimens the concept of the plastic limit load, the Burdekin-Dawes-design-concept, the J-design-curve according to Turner, the estimation proceeding according to Shih and Kumar, the Two-Criteria-Approach and the FAD according to Pellini were examined and the limits of their application exhibited. The maximum loads of wide plate specimens can be estimated by the plastic limit load, if no low-stress-fractures occur. Corresponding to the Pellini-concept no low-stress-fractures occured at test temperatures above NDT, if the NDT-temperature of the region of material was used, in which the crack was located. With the concept according to Shih and Kumar an estimation of the instability loads of wide plate specimens is possible, if the fracture behaviour is fully ductile, but not in all cases conservative predictions were made. A prediction of critical stresses and crack sizes is possible with the other concepts examined, if the evaluations are based on the critical values for the onset of stable or unstable crack growth. (orig.)
Abstract (German)
Anhand der Ergebnisse von Zugversuchen an mittengekerbten Grossproben wurde das Konzept der plastischen Grenzlast, das Konzept von Burdekin-Dawes, die J-Design-Kurve nach Turner, das Konzept von Shih und Kumar, der Two-Criteria-Approach und das FAD nach Pellini ueberprueft und die Grenzen fuer die Anwendung aufgezeigt. Mit der plastischen Grenzlast koennen die Hoechstlasten der Grossproben abgeschaetzt werden, wenn keine Niederspannungsbrueche auftreten. Entsprechend dem Pellini-Konzept wurden oberhalb NDT keine Niederspannungsbrueche beobachtet, wenn jeweils die NDT-Temperatur des Werkstoffbereichs als Bezugsgroesse gewaehlt wurde, in den der Fehler eingebracht war. Mit dem Naeherungsverfahren von Shih und Kumar ist bei voll duktilem Bruchverhalten eine Abschaetzung der Hoechstlasten der Grossproben moeglich, es ergaben sich aber nicht in jedem Fall konservative Vorhersagen. Mit den anderen untersuchten Konzepten ist eine Abschaetzung der kritischen Spannungen und Fehlergroessen moeglich, wenn die Werte fuer den Beginn einer stabilen oder instabilen Rissverlaengerung aus dem Bruchmechanikversuch zugrunde gelegt werden. (orig.)Additional details
Additional titles
- Original title (German)
- Bewertung der Ergebnisse von Grosszugversuchen mit verschiedenen Versagenskonzepten
Publishing Information
- Journal Title
- Steel Res.
- Journal Volume
- 56
- Journal Issue
- 6
- Series
- Steel Res.
- Journal Page Range
- 333-339
- ISSN
- 0177-4832
- CODEN
- STRSE
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 17049806
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CRACK PROPAGATION; DIAGRAMS; FORECASTING; FRACTURE MECHANICS; NOTCHES; PLATES; STEEL-MNNIMO; STRESSES; TENSILE PROPERTIES
- Descriptors DEC
- ALLOYS; CARBON ADDITIONS; INFORMATION; IRON ALLOYS; IRON BASE ALLOYS; LOW ALLOY STEELS; MANGANESE ALLOYS; MECHANICAL PROPERTIES; MECHANICS; MOLYBDENUM ADDITIONS; NICKEL ADDITIONS; STEELS