Preliminary performance assessment of the engineered barriers for a low- and intermediate-level radioactive waste repository

Radionuclide release from an engineered barrier in a low- and intermediate-level waste repository is evaluated. The results of experimental studies conducted to determine the radionuclide diffusion coefficients and the hydraulic conductivities of calcium bentonite and crushed granite mixtures are presented. The hydraulic conductivity of the mixture is relatively low even at low dry density and clay content, and the principal mechanism of radionuclide migration through the mixture is diffusion. The measured values of apparent diffusion coefficients in calcium bentonite with a dry density of 1.4 Mg/m3 are of the order of 10-13 to 10-12 m2/s for cations and 10-11 m2/s for iodine. These values are similar to those in sodium bentonite. The radionuclide release rates from the engineered barrier composed of the concrete structure and the clay-based backfill were calculated. Carbon-14 and 99Tc are the important nuclides; however, their maximum release rates are <10-5 GBq/yr. To quantify the effect of uncertainties of input parameters on the radionuclide release rates, Latin Hypercube sampling was used, and the ranges of release rates were estimated statistically with a confidence level of 95%. The uncertainties of the assessment results of the radionuclide release rate are larger in the case of the sorbing nuclides such as 137Cs. Finally, the sensitivity of the input parameter to release rate is also evaluated