Osteoblastic differentiation of stem cells induced by graphene oxide-hydroxyapatite-alginate hydrogel composites and construction of tissue-engineered bone

This study aimed to investigate the effect of graphene oxide (GO)-hydroxyapatite (HA)-sodium alginate (SA) composite application in the field of bone tissue engineering. Four scaffold groups were established (SA-HA, SA-HA-0.8%GO, SA-HA-1.0%GO and SA-HA-1.2%GO) and mixed with bone marrow mesenchymal stem cells (BMSCs). Hydrogel viscosity was measured at room temperature, and after freeze-drying and Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) to detect substance crystallinity, the printability of each hydrogel type was measured with a printing grid. Scanning electron microscopy (SEM) was used to observe the internal microstructure of the scaffolds and to evaluate the growth and proliferation of cells on the scaffold. A hollow cylinder was printed to compare the forming effect of the hydrogel bioinks, and cell-hydrogel composites were implanted under the skin of nude mice to observe the effect of the hydrogels on osteogenesis in vivo. Increased GO concentrations led to reduced scaffold degradation rates, increased viscosity, increased printability, increased mechanical properties, increased scaffold porosity and increased cell proliferation rates. In vivo experiments showed that hematoxylin and eosin (HE) staining, Alizarin red staining, alkaline phosphatase staining and collagen type I immunohistochemical staining increased as the implantation time increased. These results demonstrate that GO composites have high printability as bioinks and can be used for bioprinting of bone by altering the ratio of the different components.