XRD characterisation of composite Ni-based coatings prepared by electrodeposition

The present work is aimed at XRD investigation of structural parameters that influence the functional properties of Ni–W/Al2O3 electrodeposit coatings. The relationship between electrodeposition parameters and structural properties of the coatings deposited on steel substrates has been determined. XRD investigations were performed on a Bruker D8 Discover diffractometer equipped with a position-sensitive linear detector. The modified sin2ψ X-ray diffraction method was used to determine the macroscopic residual stresses of deposits. The crystallite size and lattice strain of the coatings were evaluated by analysis of X-ray diffraction patterns (Rietveld analysis). The crystallographic texture was analysed using the orientation distribution function (ODF) calculated from the incomplete pole figures. It was shown that the structural properties of the deposits were strongly correlated with chemical composition. X-ray diffraction patterns of all Ni–W coatings exhibit mainly the fcc phase structure of the Ni–W solid solution with a lattice parameter intermediate between those of Ni and W, which rises when the tungsten content increases. At the same time the crystallite dimension (the size of the coherent domains) was gradually reduced. It was found that Ni–W coatings containing about 40 wt.% W revealed the tensile residual stresses (2300–1200 MPa), depending on deposition conditions.