Published April 2011
| Version v1
Journal article
Dose estimates for an insertion device beamline with a tapered absorber at the Canadian Light Source
Creators
- 1. Canadian Light Source Inc., University of Saskatchewan, 101 Perimeter Road, Saskatoon, SK, S7N 0X4 (Canada)
- 2. Applied Research Laboratory, KEK, High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba-shi, Ibaraki 305-0801 (Japan)
Description
A radiation study is carried out when electrons injected into the storage ring strike a tapered copper absorber beamline component at the Canadian Light Source (CLS). The dose estimates are given for the absorber and the aluminum beam pipe inside the storage ring. Also presented are dose estimates when radiation is mitigated by the storage ring shielding walls, the side wall and the ratchet wall.
Availability note (English)
Available from http://dx.doi.org/10.1016/j.radmeas.2011.02.021Additional details
Identifiers
- DOI
- 10.1016/j.radmeas.2011.02.021;
- PII
- S1350-4487(11)00068-0;
Publishing Information
- Journal Title
- Radiation Measurements
- Journal Volume
- 46
- Journal Issue
- 4
- Journal Page Range
- p. 418-424
- ISSN
- 1350-4487
- CODEN
- RMEAEP
INIS
- Country of Publication
- United Kingdom
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 42082752
- Subject category
- S43: PARTICLE ACCELERATORS; S61: RADIATION PROTECTION AND DOSIMETRY;
- Descriptors DEI
- CANADA; ELECTRONS; INJECTION; RADIATION DOSES; SHIELDING; STORAGE RINGS; SYNCHROTRONS; WALLS
- Descriptors DEC
- ACCELERATORS; CYCLIC ACCELERATORS; DEVELOPED COUNTRIES; DOSES; ELEMENTARY PARTICLES; FERMIONS; INTAKE; LEPTONS; NORTH AMERICA
Optional Information
- Copyright
- Copyright (c) 2011 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.