Published October 15, 2008
| Version v1
Journal article
Determination of the tip temperature in laser assisted atom-probe tomography using charge state distributions
Creators
- 1. Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom)
- 2. Australian Key Centre for Microscopy and Microanalysis, University of Sydney, Sydney, NSW 2006 (Australia)
Description
The method suggested by Kellogg [J. Appl. Phys. 52, 5320 (1981)] to estimate the temperature of a field emitter under laser pulsing irradiation is reconsidered in the case of a W-Re alloy. It is shown that the temperature obtained using this method is not the absolute temperature, but, if properly calibrated, a value that could be considered as a good approximation of the average temperature reached by the tip when illuminated by picosecond laser pulses
Additional details
Identifiers
- DOI
- 10.1063/1.3006017;
Publishing Information
- Journal Title
- Journal of Applied Physics
- Journal Volume
- 104
- Journal Issue
- 8
- Journal Page Range
- p. 084914-084914.8
- ISSN
- 0021-8979
- CODEN
- JAPIAU
INIS
- Country of Publication
- United States
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 40059493
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- APPROXIMATIONS; BINARY ALLOY SYSTEMS; CHARGE STATES; IRRADIATION; LASERS; PULSES; RHENIUM ALLOYS; TOMOGRAPHY; TUNGSTEN ALLOYS
- Descriptors DEC
- ALLOY SYSTEMS; ALLOYS; CALCULATION METHODS; DIAGNOSTIC TECHNIQUES; TRANSITION ELEMENT ALLOYS
Optional Information
- Notes
- (c) 2008 American Institute of Physics