There is a newer version of the record available.

Published 2024 | Version v1
Journal article

Characterization and extraction of silica particles from green solvent pretreated paddy straw

  • 1. Department of Microbiology, College of Basic Sciences and Humanities, Punjab Agricultural University, Ludhiana 141 004 (India)
  • 2. Department of Renewable Energy Engineering, College of Agricultural Engineering and Technology, Punjab Agricultural University, Ludhiana 141 004 (India)

Description

This paper reports process development for the extraction of silica from paddy straw pretreated with green solvent and its characterization. Paddy straw pretreated with ethyl lactate resulted in a maximum reduction of total solids (11.78%), volatile solids (1.66%), cellulose (4.38%), hemicellulose (28.00%) and lignin (9.64%), while the increase in ash and silica content by 7.18 and 37.30%, respectively. Silica was extracted from 1% pretreated paddy straw using base dissolution and acid precipitation methods and was optimized by response surface methodology (RSM) using three parameters, viz. slurry concentration, and NaOH and HCl normalities to improve the silica yield. Maximum silica yield of 1.57 g per 2.5 g paddy straw ash (PSA) with 62.8% recovery was achieved under the optimized conditions of 2.50% slurry concentration , 0.55 N NaOH and 1.50 N HCl. Physico-chemical characterization by Fourier-transform infrared spectroscopy confirmed the purity of extracted silica particles by IR peak patterns. Field emission scanning electron microscopy showed an agglomerate form of 50–200 nm amorphous silica. Inductively coupled plasma atomic emission spectroscopy of residual ash inferred its potential as fertilizer in the fields. Hence, green solvent pretreated silica extraction from paddy straw improved the commercial value of underutilized paddy straw and reduced environmental pollution. (author)

Additional details

Identifiers

Publishing Information

Journal Title
Bulletin of Materials Science
Journal Volume
47
Series
Article ID 154
Journal Page Range
[10 p.]
CODEN
BUMSDW

INIS

Country of Publication
India
Country of Input or Organization
India
INIS RN
55066493
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
EXTRACTION; PYROMETALLURGY; REDUCTION; SILICA; SURFACE PROPERTIES
Descriptors DEC
CHEMICAL REACTIONS; EXTRACTIVE METALLURGY; METALLURGY; MINERALS; OXIDE MINERALS; SEPARATION PROCESSES