The multichannel analog mamory

The multichannel analog memory has been created for storage of voltage amplitude of short pulse signals coming from parallel channels of approximately 300 monitors of the linear induction accelerator (LIA-30) at the (0-50) Hz frequency and a small relative delay. The stored voltages are held long enough for reading and measurement after the end of each single accelerator pulse. The single width CAMAC module provides storing of the 8 signals amplitudes (0.02-5) V during 0.3 μs and hold time more than (1-10) ms with 0.1% error. The amplitude discrimination and the coming time selection of stored signals are possible. During the hold time the input is noiseproof to more than 60 db