Published February 2006 | Version v1
Journal article Metadata-only

Structure and mechanical properties of stainless steels subjected to severe plastic deformation

Creators

  • 1. Ufimskij Gosudarstvennyj Aviatsionnyj Technicheskij Univ., Ufa (Russian Federation)
  • 2. RAN, Inst. Problem Sverkhplastichnosti Metallov, Ufa (Russian Federation)

Description

A study is made into physical, mechanical and corrosion properties of stainless austenitic, austenitic-ferritic and ferritic steels (12Kh18N10T, 12Kh21N5T, 13KH25T) with microcrystalline and submicrocrystalline structures obtained under various heat treatment and working conditions. A comparative investigation of disperse structure formation in austenitic and ferritic steels is accomplished. A consideration is given to a structure type effect on mechanical properties of the steels

Abstract (Russian)

Изучены физические, механические и коррозионные свойства нержавеющих аустенитных, аустенитно-ферритных и ферритных сталей (12Х18Н10Т, 12Х21Н5Т, 13Х25Т) с микрокристаллической и субмикрокристаллической структурами, полученными по различным схемам деформации и термической обработки. Проведено сравнительное исследование формирования дисперсной структуры в аустенитной и ферритной сталях. Рассмотрено влияние типа структуры на механические свойства

Additional details

Additional titles

Original title (Russian)
Структура и механические свойства нержавеющих сталей, подвергнутых интенсивной пластической деформации

Publishing Information

Journal Title
Metallovedenie i Termicheskaya Obrabotka Metallov
Journal Issue
no.2
Journal Page Range
p. 27-32
ISSN
0026-0819
CODEN
MTOMAX

INIS

Country of Publication
Russian Federation
Country of Input or Organization
Russian Federation
INIS RN
37064535
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
ACTIVATION ENERGY; CHEMICAL COMPOSITION; DEFORMATION; FERRITIC STEELS; FORGING; GRAIN SIZE; HOT WORKING; INTERGRANULAR CORROSION; ROLLING; STEEL-CR18NI10TI; STEEL-CR25; TEMPERATURE RANGE 0400-1000 K; TENSILE PROPERTIES
Descriptors DEC
ALLOYS; AUSTENITIC STEELS; CARBON ADDITIONS; CHEMICAL REACTIONS; CHROMIUM ALLOYS; CHROMIUM STEELS; CHROMIUM-NICKEL STEELS; CORROSION; CORROSION RESISTANT ALLOYS; ENERGY; FABRICATION; FERRITIC STEELS; HEAT RESISTANT MATERIALS; HEAT RESISTING ALLOYS; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; MATERIALS; MATERIALS WORKING; MECHANICAL PROPERTIES; MICROSTRUCTURE; NICKEL ALLOYS; SIZE; STAINLESS STEELS; STEELS; TEMPERATURE RANGE; TITANIUM ADDITIONS; TITANIUM ALLOYS; TRANSITION ELEMENT ALLOYS

Optional Information

Notes
17 refs., 3 figs., 4 tabs.