PVIS-4, Pressure vessel irradiation, source preparation

1 - Description of program or function: The program prepares a fixed neutron source distribution in radial, (r,θ), (r,z) or (r,θ,z) geometry for ANISN, DORT or TORT. The user can input the source distribution in some relatively compact form (typically a few variables defining the spectrum, 10 values for the axial source distribution and, for the horizontal distribution, the values at the center and corners of each of the outermost fuel bundles and the average value for each interior bundle). The program then creates the required source arrays, such as 96*, 97* and 98* arrays for DORT. 2 - Methods: Each required operation is performed by a separate module (a set of subprograms). HORIHX or HORISQ takes a source distribution in the transverse plane, given at the center and corners of each fuel bundle in hexagonal or square geometry, and transforms it into (r,θ) or radial geometry. In the latter case, the output distribution may be averaged in the azimuthal direction or azimuthal maxima may be obtained. FOUR takes an axial distribution, specified as a histogram, and approximates this with a Fourier series. This is then used to obtain a histogram distribution for a different axial mesh. SQPIN takes a 3-D pin-wise distribution in square geometry and transforms it into a radial, (r,θ), (r,z) or (r,θ,z) distribution. FISPEC calculates a group-wise energy spectrum from any of several different functional forms. Several components with different forms may be combined into one spectrum. COMBI combines the space and energy distributions prepared by the other modules and presents the result in a format appropriate for the SN programs in the DOORS system. 3 - Restrictions on the complexity of the problem: At present a reactor core of hexagonal fuel bundles must have 30- or 60-degree symmetry, a core of square bundles must have 45- or 90-degree symmetry (except if the sq-pin option is used). Other core geometries are not supported for the input distribution. Only cylindrical geometry is supported for the output source distribution