Published July 25, 2008 | Version v1
Journal article

Effect of special microstructure on the mechanical properties of nanocomposite

  • 1. Centre for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan 250061 (China)
  • 2. School of Materials Science and Engineering, University of Jinan, Jinan 250022 (China)

Description

Al2O3 nanobelts were observed in the material Al2O3/SiCμ/SiCn nanocomposite with high-resolution transmission electron microscopy (HRTEM), the forming of ductile nanobelts is helpful for the improvement of fracture toughness. In addition, the special microstructure such as dislocations and compound twins were also observed in the nanocomposite with TEM, the complicated dislocation configurations and the forming of twins in larger SiC particles contributed to the improvement of fracture toughness by dissipating fracture energy. The Al2O3/SiC interface bonding was strengthened which also lead to the high mechanical properties of the nanocomposite

Availability note (English)

Available from http://dx.doi.org/10.1016/j.msea.2007.10.072

Additional details

Identifiers

DOI
10.1016/j.msea.2007.10.072;
PII
S0921-5093(07)01808-4;

Publishing Information

Journal Title
Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
Journal Volume
487
Journal Issue
1-2
Journal Page Range
p. 258-263
ISSN
0921-5093
CODEN
MSAPE3

Optional Information

Copyright
Copyright (c) 2007 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.