Immobilization of yeast cells with ionic hydrogel produced by radiation polymerization

The mixture of an ionic monomer of 2-acrylamido 2-methylpropane-sulfonic acid and a series of polyethylene glycol dimethacrylate monomer were polymerized at-78 deg C with 60Co γ-rays and were used for immobilization of yeast cells. The immobilized yeast cells with these carriers had higher ethanol productivity than that without any carriers. The yield of ethanol with poly TBAS-14G carrier was the highest, and increased by 3.5 times compared with the free yeast cells. It was found that the ethanol yield increased with the increase of the glycol number in polyethylene glycol dimethacrylate. The state of the immobilized cells was observed with microscope and it was found that the difference in the ethanol productivity was mainly due to the difference in the internal structure and the properties of polymer carrier. It was considered that the polymer carrier had a proper hydrophilicity, swelling ability, cation in the surface and porousity in the internal structure for immobilizing yeast cells