Published October 1982 | Version v1
Journal article

Alpha particle collimator for micron-sized beam

  • 1. Department of Electrical Engineering and Computer Sciences and the Electronics Research Laboratory, University of California, Berkeley, California 94720

Description

A collimated alpha source is constructed from a drawn glass microcapillary and a plated polonium wire source. The shape of the capillary is approximately Gaussian, allowing an analytical model for the collimated flux intensity. The very gradual taper results in a nearly monochromatic beam. Two models are presented characterizing the particle flux intensity and its profile on a surface below the collimator tip. These models are experimentally verified using spectroscopy and isolated node mapping. Collimators having tip radii ranging from 5 to 25 μ have been successfully drawn and tested

Additional details

Publishing Information

Journal Title
Rev. Sci. Instrum.
Journal Volume
53
Journal Issue
10
Series
Rev. Sci. Instrum.
Journal Page Range
1581-1585
ISSN
0034-6748

INIS