Simulation by a mathematical model of the groundwater flow between the Alps and the Black Forest; Part A: regional model; Part B: local model (Northern Switzerland)

The purpose of this report is to present the development of two hydrogeologic models of the groundwater flow regime in the crystalline of northern Switzerland. These models are constructed at two scales. The regional model (23000 km2) accounts for all recharge to and discharge from the crystalline within the model boundaries. The local model (900 km2) allows for greater structural, stratigraphic and topographic complexity in a more restricted area including some of the areas of interest to CEDRA. The regional model provides the hydrologic boundary conditions for the local model. All steps followed in constructing and testing the models are presented. This includes defining the areal and vertical geometry of the principal aquifers and aquitards. In addition, the hydrogeologic properties of these layers are defined; including their permeability, homogeneity, anisotropy and continuity. Discontinuities (e.g. faults) are modeled as discrete features. Hydrologic boundary conditions are specified based on observed or inferred potentiometric or flow (infiltration/exfiltration) data. The developed conceptual models are tested with program FEM 301. The results of this application consist of heads at every noidal point and recharge/discharge rates at every constant head node. These results are utilized to define the general groundwater flow regimes in the crystalline. In addition, the results are compared to observed heads and discharges in an attempt to validate the conceptual models. Representative hydraulic gradients at potential areas of interest to CEDRA are presented. Sensitivity analyses have been conducted to define the groundwater flow systems response to uncertain parameters and boundary conditions