Published July 1992 | Version v1
Report Restricted

Model test of reactor vessel wall. Pt. 2

Creators

Description

Due to test interruption because of cut promotion means, the original objective of the project - verification of reactor wall design - could not be achieved because by that point in time the slabs had not yet failed (DIN 1.4948 = X 6 CrNi 18 11). Considering, however, the elongation curve, in particular that of the faulty slab, failure at an earlier stress cycle value than calculated is highly probable. (orig./HP)

Availability note (English)

MF available from INIS under the Report Number.

Abstract (German)

Aufgrund des foerderungsbedingten Abbruchs der Versuche konnte die urspruengliche Zielsetzung des Vorhabens - Verifizierung der Auslegung der Reaktorwand - nicht erreicht werden, da ein Versagen der Platten bis zu diesem Zeitpunkt noch nicht vorlag (DIN 1.4948 = X 6 CrNi 18 11). Betrachtet man jedoch den Dehnungsverlauf insbesondere in der Platte mit Fehlern ist zu vermuten, dass ein Versagen zu einer frueheren Lastspielzahl als berechnet sehr wahrscheinlich ist. (orig./HP)

Files

Restricted

The record is publicly accessible, but files are restricted to users with access.

Additional details

Additional titles

Subtitle (English)
Test performance, measurement and partial evaluation
Original title (German)
Modellkoerperversuch zur Reaktortankwand. T. 2
Original subtitle (German)
Versuchsdurchfuehrung, Messung und Teilauswertung.

Publishing Information

Imprint Pagination
20 p.
Report number
INIS-mf--14179

INIS

Country of Publication
Germany
Country of Input or Organization
Germany
INIS RN
25030561
Subject category
S36: MATERIALS SCIENCE; S21: SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS;
Descriptors DEI
COOLANT LOOPS; CREEP; DEFORMATION; DESIGN; DYNAMIC LOADS; ELONGATION; FAILURES; FATIGUE; PLATES; SIMULATION; SNR REACTOR; STEEL-CR18NI11; STRESSES; TANKS; TEMPERATURE DEPENDENCE
Descriptors DEC
ALLOYS; AUSTENITIC STEELS; BREEDER REACTORS; CARBON ADDITIONS; CHROMIUM ALLOYS; CHROMIUM-NICKEL STEELS; CONTAINERS; CORROSION RESISTANT ALLOYS; EPITHERMAL REACTORS; FAST REACTORS; FBR TYPE REACTORS; HEAT RESISTING ALLOYS; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; LIQUID METAL COOLED REACTORS; LMFBR TYPE REACTORS; MECHANICAL PROPERTIES; NICKEL ALLOYS; POWER REACTORS; REACTORS; SODIUM COOLED REACTORS; STAINLESS STEELS; STEELS

Optional Information

Contract/Grant/Project number
Foerderkennzeichen BMFT RB 7061; Project Number MPA 8707 00 000
Funding organization
Bundesministerium fuer Forschung und Technologie, Bonn (Germany).