Manufacturing study of Be, W and CFC bonded structures for plasma-facing components

A manufacturing study has been conducted for Be, W, and CFC bonded structures employed in plasma-facing components for the ITER. For Be tiles bonded to the Cu-Cr-Zr alloy heat sink with stainless-steel cooling pipes, a one-axis hot press with two heating processes has been used to bond the three materials. An Al-Si base interlayer has been used to bond Be to the Cu-alloy. The heating processes have been selected to match the required heat treatment conditions for the Cu-alloy. Because of the limited heat processes using a conventional hot press, the manufacturing cost can be minimized. For both the W and CFC tiles, the materials have been brazed at the same time to the Cu-alloy. Ni-Cu-Mn and Cu-Ti brazing materials have been used for the W and CFC tiles, respectively. Using the above bonding techniques, partial mockups of a blanket first-wall panel and divertor target have been successfully manufactured