Description and evaluation of local corrosion damage on heating pipes of nuclear powerstation steam raising units made of steel of type AISI 321
Description
The wide spectrum of the corrosion damage occurring in the stream raising units of the WWER units (Greifswald nuclear powerstation) (X8 CrNiTi 18 10) was characterized metallographically, fractographically and microanalytically. The formation and spread of damage is induced by pitting or directly from the pipe surface and runs mostly transcrystalline, where most of the damage is 'corroded out' and therefore does not follow a typical SRK course. Cu and S species in the corrosion product have their course in components of the secondary circuit containing copper and in the regeneration slip of the ion exchange resin. It can be shown by metallographic tomography that fine cracks with direct contact between the sides of the cracks cannot be detected by the non-destructive eddy current measurement technique. In such cases, non-destructive test technique only shows slight depths of cracks. (orig./DG)
Abstract (German)
Das breite Spektrum der im DE der WWER-Bloecke (KKW Greifswald) auftretenden Korrosionsschaeden (X8 CrNiTi 18.10) wurde metallographisch, fraktographisch und mikroanalytisch charakterisiert. Die Schadensbildung und -ausbreitung erfolgt lochfrassinduziert oder direkt von der Rohroberflaeche und verlaeuft zumeist transkristallin, wobei die meisten Schaeden 'auskorrodiert' sind und somit keinem typischen SRK-Verlauf folgen. Cu- und S-Spezies im Korrosionsprodukt haben ihre Ursache in Cu-haltigen Bauteilen des Sekundaerkreislaufes und im Regenerierschlupf des Ionenaustauscherharzes. Durch metallographische Tomographie konnte gezeigt werden, dass feine Risse mit direktem Kontakt zwischen den Rissflanken mit der zerstoerungsfreien Wirbelstrommesstechnik nicht erfasst werden koennen. In solchen Faellen zeigt die zerstoerungsfreie Prueftechnik zu geringe Risstiefen an. (orig./DG)Additional details
Additional titles
- Original title (German)
- Beschreibung und Bewertung von lokalen Korrosionsschaeden an Heizrohren von KKW-Dampferzeugern des Stahl-Typs AISI 321
Publishing Information
- Imprint Title
- 18. MPA-Seminar. Safety and reliability of plant technology with special emphasis on nuclear technology. Vol. 1. Main focus: Safety aspects for long operational life and new reactor concepts. Papers 1-32
- Imprint Pagination
- [760 p.].
- Journal Page Range
- p. 32.1-32.17.
Conference
- Title
- Safety aspects for long operational life and new reactor concepts.
- Original Conference Title
- 18. MPA-Seminar: Sicherheit und Verfuegbarkeit in der Anlagentechnik -Langzeitsicherheit und Neue Reaktorkonzepte
- Acronym
- 18. MPA seminar on safety and reliability of plant technology
- Dates
- 8-9 Oct 1992.
- Place
- Stuttgart (Germany).
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 26045153
- Subject category
- S21: SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS; S36: MATERIALS SCIENCE; S36: MATERIALS SCIENCE;
- Resource subtype / Literary indicator
- Conference, Non-conventional Literature
- Descriptors DEI
- CRACK PROPAGATION; PITTING CORROSION; STAINLESS STEEL-321; STEAM GENERATORS; TUBES; WWER-3 REACTOR
- Descriptors DEC
- ALLOYS; AUSTENITIC STEELS; BOILERS; CARBON ADDITIONS; CHEMICAL REACTIONS; CHROMIUM ALLOYS; CHROMIUM-NICKEL STEELS; CORROSION; CORROSION RESISTANT ALLOYS; ENRICHED URANIUM REACTORS; HEAT RESISTANT MATERIALS; HEAT RESISTING ALLOYS; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; MATERIALS; NICKEL ALLOYS; POWER REACTORS; PWR TYPE REACTORS; REACTORS; STAINLESS STEELS; STEEL-CR18NI10TI; STEELS; THERMAL REACTORS; TITANIUM ADDITIONS; TRANSITION ELEMENT ALLOYS; VAPOR GENERATORS; WATER COOLED REACTORS; WATER MODERATED REACTORS; WWER TYPE REACTORS
Optional Information
- Notes
- Imprint:18. MPA-Seminar. Sicherheit und Verfuegbarkeit in der Anlagentechnik mit dem Schwerpunkt Kerntechnik. Bd. 1. Vorrangige Thematik: Langzeitsicherheit und neue Reaktorkonzepte. Vortraege 1-32.