Published November 1, 2006 | Version v1
Miscellaneous

NDE Assessment of PWSCC in Control Rod Drive Mechanism Housings

Description

Studies being conducted at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington are focused on assessing the effectiveness of Nondestructive examination (NDE) techniques for inspecting control rod drive mechanism (CRDM) nozzles and J-groove weldments. The primary objective of this work is to provide information to the United States Nuclear Regulatory Commission (US NRC) on the effectiveness of NDE methods as related to the in-service inspection of CRDM nozzles and J-groove weldments, and to enhance the knowledge base of primary water stress corrosion cracking (PWSCC) through destructive characterization of the CRDM assemblies. In describing two CRDM assemblies removed from service, decontaminated, and then used in a series of NDE measurements, this paper will address the following questions: (1) What did each technique detect?, (2) What did each technique miss?, (3) How accurately did each technique characterize the detected flaws? Two CRDM assemblies including the CRDM nozzle, the J-groove weld, buttering, and a portion of the ferritic head material were selected for this study. One contained suspected PWSCC, based on in-service inspection data and through-wall leakage; the other contained evidence suggesting through-wall leakage, but this was unconfirmed. The selected NDE measurements follow standard industry techniques for conducting in-service inspections of CRDM nozzles and the crown of the J-groove welds and buttering. In addition, laboratory based NDE methods were employed to conduct inspections of the CRDM assemblies, with particular emphasis on inspecting the J-groove weld and buttering. This paper will also describe the NDE methods used and discuss the NDE results. Future work will involve using the results from these NDE studies to guide the development of a destructive characterization plan to reveal the crack morphology and a comparison of the degradation found by the destructive evaluation with the recorded NDE responses.

Availability note (English)

Available from ASME International, New York, NY (US)

Additional details

Publishing Information

Imprint Pagination
vp.
Report number
PNNL-SA--48037

Conference

Title
Joint conference between the ASME Pressure Vessels and Piping Division and the International Council on Pressure Vessel Technology
Acronym
PVP 2006/ICPVT-11
Dates
23-27 Jul 2006
Place
Vancouver, BC (Canada)

INIS

Country of Publication
United States
Country of Input or Organization
United States
INIS RN
41025263
Subject category
S22: GENERAL STUDIES OF NUCLEAR REACTORS;
Resource subtype / Literary indicator
Conference, Non-conventional Literature
Descriptors DEI
CONTROL ROD DRIVES; DEFECTS; EVALUATION; IN-SERVICE INSPECTION; KNOWLEDGE BASE; MORPHOLOGY; NOZZLES; PRESSURE VESSELS; STRESS CORROSION; WATER
Descriptors DEC
CHEMICAL REACTIONS; CONTAINERS; CORROSION; HYDROGEN COMPOUNDS; INSPECTION; OXYGEN COMPOUNDS; REACTOR COMPONENTS

Optional Information

Contract/Grant/Project number
401001060; AC05-76RL01830
Notes
195-206
Funding organization
US Department of Energy (United States)