Case study of the atmospheric dispersion of emissions from UPPR/CDTN, Brazil

This work presents a study of the atmospheric dispersion of emissions released during activities of production and research of radiopharmaceuticals in the Center of Nuclear Technology Development (CDTN), localized in Belo Horizonte, Minas Gerais - Brazil. The installation, 'Unidade de Producao e Pesquisa de Radiofarmacos' (UPPR), was considered operating full time during a year. The general goal was to evaluate the radiological environmental impact due to these atmospheric emissions. The pollutants studied were the radionuclides F-18, C-11 and N-13. The meteorological view evaluated was a period of 365 days, simulated from the dates of a typical meteorological year. It was applied the dispersion model ARTM (Atmospheric Radionuclide Transport Model). The atmospheric emissions from UPPR were estimated for the simulation based in an extremely conservative operation condition. Others important data raised and analyzed were: topography, obstacles (buildings) and the land occupation around the CDTN. Among the main results, it is important to emphasize the estimate of the radionuclide concentration and the dose value calculated from these concentration. These results were compared with the dose restriction limit set by the standard CNEN 3.01. Areas of higher concentration were identified and are being used as reference for the positioning of the concentration's monitor of the pollutant by the Radiological Environmental Monitoring Program (PMA). (author)