Rapid fabrication of nano-structured quartz stamps

Replication of surface nano-structures from a master stamp allows large-area volume production that is otherwise cost prohibitive through conventional direct-write methods, such as electron beam lithography and focused ion beam milling. However, the creation of a master stamp containing sophisticated patterns still requires significant time on such direct-write tools. We demonstrate a method for reducing this tool time by patterning smaller nano-structures, and then enlarging them to the desired size through isotropic etching. We can create circular structures of any arrangement and size, down to the patterning limits of the direct-write tools. Subsequent metal mask deposition, lift-off, and anisotropic etching transforms the circular patterns to out-of-plane pillar structures for the final stamp. A 1 cm2 area filled with a pattern of 200 nm diameter nano-holes spaced 520 nm apart, requires only 21 h to complete using our process, compared to 75 h using conventional fabrication. We demonstrate the utility and practicality of the quartz stamps through polymer embossing and replication. Embossed polymer nano-hole arrays are coated with a Cr/Au (5/100 nm) film to create surface plasmon resonance structures. Extraordinary optical transmission spectra from the metallized arrays show the expected spectral features when compared to focused ion beam milled structures. (paper)