Scattered-field FDTD and PSTD algorithms with CPML absorbing boundary conditions for light scattering by aerosols
- 1. Science Systems and Applications, Inc., Hampton, VA 23666 (United States)
- 2. United States Army Research Laboratory, Adelphi, MD 20783 (United States)
- 3. Department of Atmospheric Sciences, University of Washington, Seattle, WA 98195 (United States)
- 4. NASA Langley Research Center, Hampton, VA 23681 (United States)
Description
As fundamental parameters for polarized-radiative-transfer calculations, the single-scattering phase matrix of irregularly shaped aerosol particles must be accurately modeled. In this study, a scattered-field finite-difference time-domain (FDTD) model and a scattered-field pseudo-spectral time-domain (PSTD) model are developed for light scattering by arbitrarily shaped dielectric aerosols. The convolutional perfectly matched layer (CPML) absorbing boundary condition (ABC) is used to truncate the computational domain. It is found that the PSTD method is generally more accurate than the FDTD in calculation of the single-scattering properties given similar spatial cell sizes. Since the PSTD can use a coarser grid for large particles, it can lower the memory requirement in the calculation. However, the Fourier transformations in the PSTD need significantly more CPU time than simple subtractions in the FDTD, and the fast Fourier transform requires a power of 2 elements in calculations, thus using the PSTD could not significantly reduce the CPU time required in the numerical modeling. Furthermore, because the scattered-field FDTD/PSTD equations include incident-wave source terms, the FDTD/PSTD model allows for the inclusion of an arbitrarily incident wave source, including a plane parallel wave or a Gaussian beam like those emitted by lasers usually used in laboratory particle characterizations, etc. The scattered-field FDTD and PSTD light-scattering models can be used to calculate single-scattering properties of arbitrarily shaped aerosol particles over broad size and wavelength ranges. -- Highlights: • Scattered-field FDTD and PSTD models are developed for light scattering by aerosols. • Convolutional perfectly matched layer absorbing boundary condition is used. • PSTD is generally more accurate than FDTD in calculating single-scattering properties. • Using same spatial resolution, PSTD requires much larger CPU time than FDTD
Availability note (English)
Available from http://dx.doi.org/10.1016/j.jqsrt.2013.07.015Additional details
Identifiers
- DOI
- 10.1016/j.jqsrt.2013.07.015;
- PII
- S0022-4073(13)00298-7;
Publishing Information
- Journal Title
- Journal of Quantitative Spectroscopy and Radiative Transfer
- Journal Volume
- 131
- Journal Page Range
- p. 166-174
- ISSN
- 0022-4073
- CODEN
- JQSRAE
INIS
- Country of Publication
- United Kingdom
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 45055462
- Subject category
- S71: CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS;
- Descriptors DEI
- AEROSOLS; ALGORITHMS; BEAMS; BOUNDARY CONDITIONS; DIELECTRIC MATERIALS; FOURIER TRANSFORMATION; LASERS; LAYERS; LIGHT SCATTERING; PARTICLES; RADIANT HEAT TRANSFER; SOURCE TERMS; SPATIAL RESOLUTION
- Descriptors DEC
- COLLOIDS; DISPERSIONS; ENERGY TRANSFER; HEAT TRANSFER; INTEGRAL TRANSFORMATIONS; MATERIALS; MATHEMATICAL LOGIC; RESOLUTION; SCATTERING; SOLS; TRANSFORMATIONS
Optional Information
- Copyright
- Copyright (c) 2013 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.