On the analysis of iodine-129 and iodine-127 in environmental materials by accelerator mass spectrometry and ion chromatography

Based on a review of literature about the abundances of 129I (T1/2=15.7 Ma) in the environment we show that there is a severe lack of knowledge, in particular about natural, pre-nuclear levels. Among the two analytical techniques which are sensitive enough to investigate 129I in environmental materials, namely radiochemical neutron activation analysis (RNAA) and accelerator mass spectrometry (AMS), only AMS is capable of covering the natural, pre-nuclear levels. Since such AMS measurements require chemical separation of iodine from the matrix, a wide variety of separation schemes are necessary for environmental analyses. We report here on such schemes for the analysis of soils, plants and soft tissue. They are applied exemplary to analyses of soils from the vicinity of Chernobyl. For chemical separations prior to analysis, contamination control and blank analyses are essential. Here, we discuss quality control procedures in detail, both for RNAA and AMS. In the case of AMS we use ion-chromatography (IC) for the determination of stable iodine. The IC analysis is included in the separation schemes for environmental materials. First AMS-analyses of terrestrial biospheric materials demonstrate that natural environmental levels of 129I are lower than previously deduced from investigations using RNAA, but higher than expected from model calculations. AMS is capable of providing the missing knowledge about the radioecology of 129I