Concepts of container brittle fracture in view of the harmonisation of technical rules
Creators
- 1. BASF A.G., Ludwigshafen am Rhein (Germany, F.R.)
Description
In contrast to the German AD rules, the CODAP and BS 5500 rules take account of the influence of wall thickness at the minimum permissible operating temperature. The Sanz concept illustrates the quantitative determination of the wall thickness effect and other parameters relevant to brittle fracture. This concept is the basis of the CODAP rules. A comparison of the three concepts for steels according to the AD specification sheet W 10 shows that structural steels, boiler sheet steels, steels with high strength at low temperatures, and basic fine-grained structural steels can be used at lower temperatures in thin-walled containers according to CODAP and BS 5500. It is found that nearly all fine-grained structural steels with high toughness at low temperatures can, according to AD W 10, be used at much lower temperatures than according to CODAP and BS 5500. (orig./HP)
Abstract (German)
Im Gegensatz zum deutschen AD-Regelwerk wird im CODAP und im BS 5500 der Einfluss der Wanddicke bei der tiefsten zulaessigen Einsatztemperatur beruecksichtigt. Wie der Wanddickeneinfluss und weitere sproedbruchrelevante Parameter quantitativ erfasst werden koennen, wird anhand des Sanz-Konzepts aufgezeigt. Dieses bildet die Grundlage der Regelungen im CODAP. Ein Vergleich der drei Konzepte fuer die Staehle nach AD-Merkblatt W 10 zeigt, dass fuer Baustaehle, Kesselbleche, kaltzaehe Staehle und Feinkornbaustaehle der Grundreihe bei kleinen Wanddicken nach CODAP und BS 5500 tiefere Einsatztemperaturen zulaessig sind. Er zeigt aber auch, dass fast alle Feinkornbaustaehle der kaltzaehen und kaltzaehen Sondereihe nach AD W 10 bei tieferen Temperaturen eingesetzt werden koennen, als dies nach CODAP und BS 5500 zulaessig waere. (orig./HP)Additional details
Additional titles
- Original title (German)
- Sproedbruchkonzepte fuer Druckbehaelter vor dem Hintergrund der Harmonisierung technischer Regeln
Publishing Information
- Journal Title
- TU (Technische Ueberwachung)
- Journal Volume
- 30
- Journal Issue
- 3
- Series
- TU (Tech. Ueberwach.).
- Journal Page Range
- 104-109
- ISSN
- 0376-1185
- CODEN
- TUSZA
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 20044281
- Subject category
- S36: MATERIALS SCIENCE; S22: GENERAL STUDIES OF NUCLEAR REACTORS;
- Descriptors DEI
- BRITTLENESS; COMPARATIVE EVALUATIONS; CRACK PROPAGATION; FEDERAL REPUBLIC OF GERMANY; FRACTURE MECHANICS; FRANCE; PRESSURE VESSELS; REGULATIONS; STANDARDIZATION; STEELS; THICKNESS; UNITED KINGDOM; WELDED JOINTS
- Descriptors DEC
- ALLOYS; CARBON ADDITIONS; CONTAINERS; DEVELOPED COUNTRIES; DIMENSIONS; EUROPE; EVALUATION; IRON ALLOYS; IRON BASE ALLOYS; JOINTS; LAW; MECHANICAL PROPERTIES; MECHANICS