Preparation of hydrophilic and antifouling polysulfone ultrafiltration membrane derived from phenolphthalin by copolymerization method
Description
Graphical abstract: The mechanisms fouling and cleaning process of PSF-COOH membranes (A) the content of carboxyl less than 80%. (B) the content of carboxyl at 80%, 100%. - Highlights: • Phenolphthalin (PPL) containing carboxyl was successfully introduced into the molecule backbone of polysulfone (PSF). • A series of PSF-COOH copolymers with different carboxylation degree was synthesized and prepared as ultrafiltration membranes. • The introduction of PPL significantly improved the hydrophilicity, permeation flux and antifouling property of membranes. • This method is valuable for large-scale industrial production of hydrophilic membrane material. - Abstract: In this task, carboxylated polysulfone (PSF-COOH) was achieved by introducing the monomer of phenolphthalin (PPL) containing carboxyl to the molecule backbone of polysulfone (PSF). And a series of PSF-COOH copolymers with different carboxylation degree was synthesized by adjusting the molar (%) of bisphenol A (BPA) and PPL in direct copolymerization method and was prepared as PSF-COOH ultrafiltration membranes via phase separation method. The effect of PPL molar (%) in copolymers on the morphology, hydrophilicity, permeation flux, antifouling and mechanical properties of membranes was investigated by scanning electron microscope (SEM), atomic force microscope (AFM), water contact angle, ultrafiltration experiments and universal testing machine, respectively. The results showed that with the increased carboxyl content in membranes, the hydrophilicity, permeation fluxes and antifouling properties of membranes gradually increased. When the molar (%) of PPL to BPA was 100:0, the membrane exhibited the highest pure water flux (329.6 L/m2 h) and the maximum flux recovery rate (92.5%). When the content of carboxyl in the membrane was 80% or more, after three cycles of BSA solution (1 g/L) filtration, the flux recovery rate was basically constant or showed a slightly increase. Thus, it can achieve the goal of long term usage without compromising flux.
Availability note (English)
Available from http://dx.doi.org/10.1016/j.apsusc.2016.12.228Additional details
Identifiers
- DOI
- 10.1016/j.apsusc.2016.12.228;
- PII
- S0169-4332(16)32959-2;
Publishing Information
- Journal Title
- Applied Surface Science
- Journal Volume
- 401
- Journal Page Range
- p. 69-78
- ISSN
- 0169-4332
- CODEN
- ASUSEE
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 48090457
- Subject category
- S75: CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY;
- Descriptors DEI
- ATOMIC FORCE MICROSCOPY; CARBOXYLATION; COPOLYMERIZATION; COPOLYMERS; MECHANICAL PROPERTIES; MEMBRANES; MORPHOLOGY; SCANNING ELECTRON MICROSCOPY; ULTRAFILTRATION; WATER
- Descriptors DEC
- CHEMICAL REACTIONS; ELECTRON MICROSCOPY; FILTRATION; HYDROGEN COMPOUNDS; MICROSCOPY; ORGANIC COMPOUNDS; ORGANIC POLYMERS; OXYGEN COMPOUNDS; POLYMERIZATION; POLYMERS; SEPARATION PROCESSES
Optional Information
- Copyright
- Copyright (c) 2017 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.