Published June 2009
| Version v1
Journal article
Free vibration of orthotropic super-elliptical plates on intermediate supports
Creators
- 1. Department of Civil Engineering, Yildiz Technical University, 34210 Esenler, Istanbul (Turkey)
Description
Free vibration analysis of rectilinearly orthotropic super-elliptical plates of uniform thickness was investigated by the Ritz method. Various plate shapes ranging from an ellipse to a rectangle with rounded corners were considered for three types of support configurations: (1) completely free plate, (2) point-supported plate, and (3) plate supported along multiple concentric circular ring supports. The results were compared with those of elliptical and rectangular plates where possible and good agreement was obtained.
Availability note (English)
Available from http://dx.doi.org/10.1016/j.nucengdes.2009.02.007Additional details
Identifiers
- DOI
- 10.1016/j.nucengdes.2009.02.007;
- PII
- S0029-5493(09)00087-9;
Publishing Information
- Journal Title
- Nuclear Engineering and Design
- Journal Volume
- 239
- Journal Issue
- 6
- Journal Page Range
- p. 981-999
- ISSN
- 0029-5493
- CODEN
- NEDEAU
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 41010273
- Subject category
- S42: ENGINEERING;
- Descriptors DEI
- CONFIGURATION; PLATES; RINGS; RITZ METHOD; SHAPE; SUPPORTS; THICKNESS
- Descriptors DEC
- CALCULATION METHODS; DIMENSIONS; MECHANICAL STRUCTURES
Optional Information
- Copyright
- Copyright (c) 2009 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.