Corroborative tests for Oarai Waste Reduction Treatment Facility using the in-can type high frequency induction heating method
Creators
- 1. Japan Atomic Energy Agency, Sector of Decommissioning and Radioactive Waste Management, Oarai Research and Development Center, Oarai, Ibaraki (Japan)
- 2. Tokyo Institute of Technology, Research Laboratory for Nuclear Reactors, Tokyo (Japan)
Description
OWTF (Oarai Waste Reduction Treatment Facility) is constructed for volume reduction processing and stabilization treatment of α solid waste, which was generated from hot facilities in Oarai Research and Develop Center of Japan Atomic Energy Agency, using in-can type high frequency induction heating by remote control. This report describes corroborative tests, in which incinerating and melting performance for OWTF is confirmed with a full-scale testing furnace. We have been carrying out the tests of incinerating and melting treatment with some kinds of simulated wastes, such as enclosure form of radioactive wastes, material and articles. The results of these tests are as follows; (1) Melting treatment with complex products. Melting treatment tests were carried out with complex products such as motor, cable, substrate and rust-proof goods, then the treatment conditions were clarified. The methods of treatment are two patterns. The first one is to set an initial item into a canister before heating. The second one is additional putting of items during heating. (2) Alloying treatment of Aluminum and Iron-based metal. The alloying treatment of aluminum and iron-based metal in anticipation of proposal has been carried out. The appropriate ratio of aluminum and iron-based metal for alloying and the safety processing was clarified. As to forming voids in the alloys, except melting treatment using slag, other treatments should be taken. (3) Slag melting treatment and Sampling test. The melting conditions with slag have been clarified. In addition, the sampling conditions have been clarified for collecting the minimum amount of the molten metal sample for nuclide analysis. (4) Incineration treatment test. Incineration test has been carried out using poly-vinyl chloride and acrylic, etc. It is difficult to incinerate in general. The adhesion of ash to the metal bucket and the mineralization were observed, then and the appropriate treatments were confirmed. (author)
Availability note (English)
Available from JAEA; DOI: https://doi.org/10.11484/jaea-technology-2015-059
Files
System files
(501.0 kB)
| Name | Size | Download all |
|---|
Additional details
Identifiers
Publishing Information
- Imprint Pagination
- 349 p.
- Report number
- JAEA-Technology--2015-059
INIS
- Country of Publication
- Japan
- Country of Input or Organization
- Japan
- INIS RN
- 47116739
- Subject category
- S12: MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES;
- Descriptors DEI
- ALUMINIUM; COMBUSTION; CONTAINERS; INDUCTION FURNACES; IRON; JAEA; MELTING; MULTI-ELEMENT ANALYSIS; RADIOACTIVE WASTES; SLAGS; SOLID WASTES; VISCOSITY; WASTE PROCESSING; X-RAY FLUORESCENCE ANALYSIS
- Descriptors DEC
- CHEMICAL ANALYSIS; CHEMICAL REACTIONS; ELECTRIC FURNACES; ELEMENTS; FURNACES; JAPANESE ORGANIZATIONS; MANAGEMENT; MATERIALS; METALS; NATIONAL ORGANIZATIONS; NONDESTRUCTIVE ANALYSIS; OXIDATION; PHASE TRANSFORMATIONS; PROCESSING; RADIOACTIVE MATERIALS; THERMOCHEMICAL PROCESSES; TRANSITION ELEMENTS; WASTE MANAGEMENT; WASTES; X-RAY EMISSION ANALYSIS
Optional Information
- Notes
- 5 refs., 86 figs., 69 tabs., 41 photos