Published September 2012 | Version v1
Journal article

Determination of the 238U capture to total fission ratio in alternate depleted uranium/polyethylene shells with D-T neutrons

  • 1. Department of Engineering Physics, Tsinghua University, Beijing 100084 (China)
  • 2. Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

Description

Aiming at checking the conceptual design of the subcritical blanket in the fusion–fission hybrid reactor, an integral experiment was carried out on an alternate depleted uranium/polyethylene-shell setup with D-T neutrons using activation technique. 18 depleted uranium foils were placed at 90° direction to the incident D beam, and the distribution of the 238U capture to total fission ratio was determined by measuring the 277.6 keV γ ray generated by neutron capture of 238U and the 293.3 keV γ ray generated by fission of 235U and 238U. The ratios were generally between 1 and 2 in the depleted uranium shells, with relative uncertainties between 3.0% and 5.5%. The ratios were calculated by the MCNP4B code employing ENDF/B-VI nuclear data library, the discrepancies between calculations and experiments were all within 6%, and the average calculation to experiment(C/E) ratio was 0.998.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.fusengdes.2012.07.003

Additional details

Identifiers

DOI
10.1016/j.fusengdes.2012.07.003;
PII
S0920-3796(12)00321-3;

Publishing Information

Journal Title
Fusion Engineering and Design
Journal Volume
87
Journal Issue
9
Journal Page Range
p. 1679-1683
ISSN
0920-3796
CODEN
FEDEEE

Optional Information

Copyright
Copyright (c) 2012 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.