Biodiesel purification methodology produced in the RECOPE experimental plant, using ion exchange resins
Description
A methodology was proposed for the biodisel purification of crude palm oil produced in a plant located on the Refinadora Costarricense de Petroleo (RECOPE) campus in Alto de Ochomogo, using ion exchange resins. A comparison between two resins was carried out: the USF C-211H, which had been acquired together with the RECOPE experimental plant and the PD206 resin, which was in the process of being acquired at the time of starting the project. The biodisel was eluted by glass columns packed with each resin, to determine the saturation of the same. The percentage of free and bound glycerin and the presence of soaps were analyzed as response variables. With the results obtained, it was determined that the PD206 resin is more efficient in the removal of glycerin, soaps and methanol than the resin USF C-211H. However, neither of the two resins diminishes the acidity of the biodisel. A biodisel sample was eluted by the PD206 resin and the quality of the obtained product was analyzed. A flash point of 145 degrees was obtained. A total acid number of 0.82 mg KOH / G was shown, no presence of water or sediment was observed. The percentage value of carbon residue was 0.01% m / m, the cloud point was 12 degrees, the density at 15 degrees was 0.8713 g / cm 3, the viscosity at 40 degrees was 2.75 mm 2 /s; the stability to oxidation was 14.5 h, the percentage of free glycerin was 0.01% m / m and the percentage of total glycerin was 0.06% m / m, finally a percentage of Fatty Acids Methyl Esters (FAME) of 98,6%. Of the analyzed parameters, all are within the limits established in the Reglamento Tecnico Centroamericano except the acidity value, which exceeds the maximum value of 0.05 mg KOH / g sample. An economic analysis was carried out to evaluate which resin provides the best option to complete the purification process of the biodisel produced. The PD206, despite being more expensive, purifies a larger volume of biodiesel, so for a better negotiation in the purchase price, this resin is the ideal to complete the process
Availability note (English)
Available from Biblioteca Luis Demetrio Tinoco, Universidad de Costa RicaAbstract (Spanish)
Una metodologia fue propuesta para la purificacion de biodisel de aceite crudo de palma producido en una planta ubicada en el plantel de la Refinadora Costarricense de Petroleo (RECOPE) en el Alto de Ochomogo, utilizando resinas de intercambio ionico. Una comparacion entre dos resinas fue realizada: la USF C-211H, que habia sido adquirida junto con la planta experimental de RECOPE y la resina PD206, que al momento de iniciar el proyecto se encontraba en proceso de adquisicion. El biodisel fue eluido por columnas de vidrio empacadas con cada resina, para determinar la saturacion de las mismas. Como variables de respuesta fueron analizados el porcentaje de glicerina libre y enlazada y la presencia de jabones. Con los resultados obtenidos, se determino que la resina PD206 es mas eficiente en la remocion de glicerina, jabones y metanol que la resina USF C-211H. No obstante ninguna de las dos resinas disminuye la acidez del biodisel. Una muestra de biodisel fue eluida por la resina PD206 y se analizo la calidad del producto obtenido. Un punto de inflamabilidad 145 grados fue obtenido. Un numero acido total de 0,82 mg KOH/G fue mostrado, no fue observado presencia de agua ni sedimentos. El valor de porcentaje de residuo de carbono fue de 0,01% m/m, el punto de enturbiamiento fue 12 grados, la densidad a 15 grados fue 0,8713 g/cm3, la viscosidad a 40 grados fue 2,75 mm2/s; la estabilidad a la oxidacion fue 14,5 h, el porcentaje de glicerina libre fue 0,01% m/m y el porcentaje de glicerina total fue 0,06% m/m, finalmente un porcentaje de FAME de 98,6%. De los parametros analizados, todos estan dentro de los limites establecidos en el Reglamento Tecnico Centroamericano excepto el valor de acidez, el cual sobrepasa el valor maximo de 0,05mg KOH/g muestra. Un analisis economico fue realizado para evaluar cual resina brinda la mejor opcion para completar el proceso de purificacion del biodisel producido. La PD206, a pesar de ser mas costosa, purifica un mayor volumen de biodiesel, por lo que de efectuarse una mejor negociacion en el precio de compra, esta resina es la idonea para completar el procesoAdditional details
Additional titles
- Original title (Spanish)
- Metodologia de purificacion del biodiesel producido en la planta experimental de RECOPE, utilizando resinas de intercambio ionico
Publishing Information
- Imprint Place
- San Jose (Costa Rica)
- Imprint Pagination
- 86 p.
INIS
- Country of Publication
- Costa Rica
- Country of Input or Organization
- Costa Rica
- INIS RN
- 52059786
- Subject category
- S37: INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; S09: BIOMASS FUELS;
- Resource subtype / Literary indicator
- Thesis, Numerical Data, Non-conventional Literature
- Descriptors DEI
- ALCOHOLS; BIODIESEL FUELS; CATALYSTS; CHEMICAL COMPOSITION; EXPERIMENTAL DATA; GAS CHROMATOGRAPHY; IONS; PURIFICATION; RESINS; SEPARATION PROCESSES
- Descriptors DEC
- ALTERNATIVE FUELS; BIOFUELS; CHARGED PARTICLES; CHROMATOGRAPHY; DATA; FUELS; HYDROXY COMPOUNDS; INFORMATION; LIQUID FUELS; NUMERICAL DATA; ORGANIC COMPOUNDS; ORGANIC POLYMERS; PETROCHEMICALS; PETROLEUM PRODUCTS; POLYMERS; SEPARATION PROCESSES
Optional Information
- Notes
- Figs., tabs., refs.; This record replaces 49040530