A combined reactivity control pattern on a floating nuclear power plant

In this study, a new combined reactivity control pattern is presented to lower the power peaking factor on a floating nuclear power plant. In the pattern the whole cycle length is divided into several boron-adjusting periods. During one boron-adjusting period, the soluble boron concentration remains unchanged and the core reactivity change is controlled by control rods. Boron concentration would only be changed at the end of a boron-adjusting period. In the whole cycle the boron concentration would be changed for two to four times, which is acceptable for a floating nuclear power plant. To get an optimized solution, a model of the combined reactivity control pattern was established, which contained boron concentration and control rod pattern (CRP) as coupled variables. A particle swarm optimization with novel mutation operator (PSONM) was applied to optimize the solution. The model was practiced based on a small modular reactor ACP100 core. The solution was optimized separately for equal division of two, three, four and five boron-adjusting periods. The results show that the combined reactivity control pattern can get a lower power peak factor than the original rod-controlled-only pattern without shortening the cycle length. Therefore, the safety of the floating nuclear power plant can be improved. (author)