Regression models to predict SCC pressure exerted on formworks containing vertical and transverse reinforcing bars

The use of self-consolidating concrete (SCC) containing recycled concrete aggregate (RCA) considerably increased in sustainable structural applications and civil engineering works. However, current literature and construction practices are not clear regarding the influence of RCA additions and presence of steel reinforcement on formwork pressure exerted by the plastic concrete. This paper reports experimental data obtained from 32 SCC mixtures possessing different stability levels and cast in 1.6-m high formwork containing various combinations of vertical and transverse steel bars. Test results have shown that mixtures incorporating recycled aggregates exhibited reduced initial maximum pressure, given the higher RCA surface roughness that promotes internal friction and material build-up at rest. The decrease in pressure was particularly accentuated in presence of steel bars, suggesting that the reinforcement cage confines the plastic concrete and carries part of its load. The transverse steel was around 1.5-times more influential than vertical steel in reducing the formwork pressure. The rates of pressure drop over time were not altered because of steel, implying that pressure decay is governed by the concrete intrinsic properties such as thixotropy, RCA friction, and cement hydration. Special emphasis was placed to develop regression models and examine suitability of existing ones to predict lateral pressure of RCA-modified SCC cast in formworks containing reinforcing bars.