Published April 1983 | Version v1
Report

Gauge for measuring the weight of area of needed felt in the range of 60-240 G/M2

  • 1. Oesterreichisches Forschungszentrum Seibersdorf G.m.b.H. Inst. fuer Isotopenanwendung

Description

The gauge is for on line measurement and recording of the fluctuations in weight of area of preneedled felt directly at the outlet of the needle machine. To measure the weight of area the method of #betta#-backscattering is used. The data collection, the evaluation of the weight of area and the display of the resultls is controlled by a 8085 microprocessor from Intel. The calculations are done by an AM 9511 calculator from AMD. The probe contains a 85Kr radiation source with a source strength of 10 mCi, which is surrounded by 6 GM-counter tubes from LND of type 7242. The probe also houses the electronics for shaping and adding the counter tube pulses and a shutter device for the source, which is operated by a single acting pneumatic cylinder. The gauge consists of two probes, mounted opposite to a metal strip which acts as backscattering support and enables measurement on two locations of the felt, the computer with its peripherals and a control device for the compressed air used to operate the source shutter. (Author)

Availability note (English)

Available by the author, OEFZS, A-2444 Seibersdorf, Austria.

Abstract (German)

Das Messgeraet dient zur Online Messung und Aufzeichnung der Flaechengewichtsschwankungen von vorgenadelten Filzen direkt am Auslauf der Nadelmaschine. Zur Messung des Flaechengewichtes wird das #betta#-Rueckstreumessprinzip verwendet. Die Messwerterfassung und Messwertauswertung sowie die Messwertanzeige wird durch einen Mikroprozessor der Type 8085 von Intel gesteuert, die notwendigen Rechenoperationen werden mit einem AM 9511 Rechner von AMD durchgefuehrt. Der Messkopf besteht aus einer 85Kr Strahenquelle mit 10 mCi Quellenstaerke, die von 6 Geiger-Mueller-Zaehlrohren der Type LND 7242 umgeben ist. Im Messkopf sind die Elektronik zur Verarbeitung der Zaehlrohrimpulse und eine Quellenschliessvorrichtung, die von einem einfach wirkenden Pressluftzylinder betaetigt wird, untergebracht. Ein Messgeraet besteht aus 2 Messkoepfen, die gegenueber einem Metallband als rueckstreuende Unterlage angebracht sind und die Messung an 2 Stellen der Filzbahn gestatten, einem Auswertegeraet und einer Pressluftsteueranlage zur Betaetigung der Quellenschliessvorrichtung. (Autor)

Additional details

Additional titles

Original title (German)
Messgeraet zur Bestimmung des Flaechengewichtes von genadeltem Filz im Bereich von 60-240 G/M

Publishing Information

Imprint Pagination
vp.
Report number
OEFZS-A--0417

Optional Information

Notes
Limited Distribution.
Secondary number(s)
IA--116/83.