Published March 15, 2005 | Version v1
Journal article

Influence of Bi2O3 and MnO2 doping on microwave properties of [(Pb,Ca) La](Fe,Nb)O3 dielectric ceramics

  • 1. Shool of Physics and Electronics, Hubei University, Xueyuan Road, 430062 Wuhan, Hubei (China)
  • 2. Electronic Department, Hua Zhong University of Science and Technology, Luoyu Road, 430074 Wuhan, Hubei (China)

Description

The effect of Bi2O3 and MnO2 addition in [(Pb0.5Ca0.5)0.92La0.08](Fe0.5Nb0.5)O3 system on the sintering and dielectric properties have been investigated using X-ray diffractions and post-resonator measurement. Perovskite and pyrochlore phase exist in samples with MnO2 content -bar 2wt.% while specimens with Bi2O3 doping possessed the third unknown phase. The dielectric properties could be obviously adjusted as well as reducing the sintering temperature in both Bi2O3 and MnO2 addition system. It was found that Bi2O3 and MnO2 co-doping could reduce the sintering temperature more effectively by 100-140oC while improve the microwave dielectric properties. Microwave dielectric properties of -bar r=91.1, Qf=4870GHz and τf=18.5ppm/oC could be obtained in [(Pb0.5Ca0.5)0.92La0.08](Fe0.5Nb0.5)O3 system when k=1, w=1wt.% and sintered at 1050oC for 4h

Additional details

Identifiers

DOI
10.1016/j.mseb.2004.11.022;
PII
S0921-5107(04)00615-4;

Publishing Information

Journal Title
Materials Science and Engineering. B, Solid-State Materials for Advanced Technology
Journal Volume
117
Journal Issue
2
Journal Page Range
p. 199-204
ISSN
0921-5107
CODEN
MSBTEK

Optional Information

Copyright
Copyright (c) 2004 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.