Published October 2019
| Version v1
Journal article
Turning of F-4UV20 Composite Plastic
- 1. Perm National Research Polytechnic University (Russian Federation)
Description
The turning of F-4UV20 composite plastic is investigated. Continuous chip is formed in all the experimental conditions: cutting speed 16–100 m/min; supply 0.05–0.2 mm/turn; cutting depth 0.5–2 mm. The wear of the cutting insert is uniform (0.1 mm at the rear surface and 0.3 mm at the front surface), with no traces of adhesion. After turning, carbon fibers remain on the machined surface, conferring antifrictional properties without significant effect on the roughness.
Additional details
Identifiers
Publishing Information
- Journal Title
- Russian Engineering Research
- Journal Volume
- 39
- Journal Issue
- 10
- Journal Page Range
- p. 884-885
- ISSN
- 1068-798X
INIS
- Country of Publication
- United States
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 51108973
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ADHESION; CARBON FIBERS; CUTTING; DEPTH; MICROSTRUCTURE; PLASTICS; ROUGHNESS; SURFACES; TOOLS; WEAR
- Descriptors DEC
- DIMENSIONS; EQUIPMENT; FIBERS; MACHINING; MATERIALS; ORGANIC COMPOUNDS; ORGANIC POLYMERS; PETROCHEMICALS; PETROLEUM PRODUCTS; POLYMERS; SURFACE PROPERTIES; SYNTHETIC MATERIALS
Optional Information
- Copyright
- Copyright (c) 2019 Allerton Press, Inc.