Tube inlet orifice design of a once-through steam generator for flow stabilization

A numerical study is conducted on the secondary side screw-type tube inlet orifice design of a once-through steam generator. An orifice length criterion for flow stabilization is derived by introducing the hydraulic resistance ratio of the orifice and the subcooled region to the two-phase and superheated regions. Various tube plugging conditions and power levels are considered, and the secondary coolant pressure at the tube outlet is adjusted to maintain a constant thermal power. Comprehensive numerical solutions are acquired to evaluate the minimum orifice length under various operating conditions. The results obtained show that a constant thermal power is maintained by properly adjusting the secondary coolant outlet pressure with a variation of the superheat degree and secondary coolant pressure drop when the steam generator operates at high power level. The steam generator performance is analyzed according to the tube plugging condition in terms of the degree of superheat, secondary side pressure drop, temperature distribution, and quality distribution. The secondary side outlet pressure curve for the constant thermal power operation is obtained, and the required minimum orifice length to suppress the flow oscillation below the allowable level is evaluated. The lowest power level results in the highest minimum orifice length, and non-plugging condition provides a limiting case for the orifice length criterion except near the 100 % power level.