Mechanisms of polyphosphate glucokinase and polyphosphate kinase reactions

Polyphosphate glucokinase [poly(P)GK] catalyzes the following reaction: poly(P)/sub n/ + glucose → poly(P)/sub n-1/ + G-6-P. With long chain poly(P) [n=750 to 400] the mechanism appeared to be processive, in which there is phosphorylation of glucose without release of intermediate sizes of the poly(P) until the chain is about 100, thereafter there were intermediate sizes formed apparently by a non-processive process. Poly(P) kinase catalyzes the following reaction: ATP + poly(P)/sub n/ ↔ ADP + poly(P)/sub n + 1/. Using short chain 32[P] poly(P) as a primer and non-radioactive ATP, long chain poly(P) is formed processively. The resulting chain has a short length labeled with 32[P] contributed by the primer on one end and the remainder is made up of unlabeled (P) from the ATP. The authors have used this 32[P] poly(P) as a substrate with poly(P)GK. If the mechanism of the poly(P)GK were initially processive, there would be a 50% chance the phosphate would be utilized from the unlabeled end and 50% of the 32[P] would remain in the shortened chain. However, all the 32[P] was lost when 20% of the poly(P) was converted to G-6-P. In contrast, with poly(P) kinase, the % of poly(P) utilized was equivalent to the % of 32[P] converted to ATP, which is consistent with a strictly processive mechanism. Even though the mechanism of poly(P)GK appeared to be processive with long chains, the on and off rate of poly(P) from the enzyme is such that there is random removal of (P) from both ends of the poly(P) chain