Electromagnetic wave absorption properties of composites with ultrafine hollow magnetic fibers
- 1. Composites Research Center, Korea Institute of Materials Science, 66 Sang-nam-dong, Changwon, Gyeongnam (Korea, Republic of)
- 2. Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (BK21 Granted Program), 291 Daehak-ro, Yuseong-gu, Daejeon (Korea, Republic of)
- 3. Department of Energy Systems Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), 50-1, Sang-ri, Hyeongpung-myeon, Dalseong-gun, Daegu 711-873 (Korea, Republic of)
Description
Ultrafine hollow magnetic fibers were prepared by electroless plating using hydrolyzed polyester fiber as a sacrificial substrate. These hollow fibers can be served for lightweight and efficient electromagnetic (EM) absorbing materials. As observed from SEM and EDS analysis, hollow structures consisting of Ni inner layer and Fe or Fe–Co outer layer were obtained. By introducing Co onto Fe, oxidation of the Fe layer was successfully prevented making it possible to enhance the complex permeability compared to a case in which only Fe was used. Polymeric composites containing the hollow fibers with different weight fractions and fiber lengths were prepared by a simple mixing process. The electromagnetic wave properties of the composites were measured by a vector network analyzer and it was found that the hollow magnetic fibers show a clear resonance peak of the complex permittivity around the X-band range (8–12 GHz) and the resonance frequency strongly depends on the fiber concentration and length. A possible explanation for the unique resonance is that the hollow fibers possess relatively low electrical conductivity and a long mean free path due to their oxidized phase and hollow structure. The calculated EM wave absorption with the measured EM wave properties showed that the composite containing 30 wt% hollow Ni/Fe–Co (7:3) fibers in length of 180 μm exhibited multiple absorbance peaks resulting in a broad absorption bandwidth of 4.2 GHz. It is obvious that this multiple absorbance is attributed to the resonance characteristic of the composite. - Highlights: • The ultrafine hollow fibers consist of inner Ni layer (∼100 nm) and outer Fe or Fe–Co layer (500–700 nm). • Composites with the fibers show a high permittivity as well as permeability at low weight fractions (10–30 wt%). • The composites show a permittivity resonance and the resonance frequency can be controlled by fiber content and length. • The composite absorber exhibits a double electromagnetic wave absorption peak
Availability note (English)
Available from http://dx.doi.org/10.1016/j.jmmm.2014.02.027Additional details
Identifiers
- DOI
- 10.1016/j.jmmm.2014.02.027;
- PII
- S0304-8853(14)00139-5;
Publishing Information
- Journal Title
- Journal of Magnetism and Magnetic Materials
- Journal Volume
- 361
- Journal Page Range
- p. 182-187
- ISSN
- 0304-8853
- CODEN
- JMMMDC
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 46039490
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ABSORPTION; ELECTRIC CONDUCTIVITY; ELECTROMAGNETIC RADIATION; FIBERS; MEAN FREE PATH; OXIDATION; PEAKS; PERMITTIVITY; POLYESTERS; SCANNING ELECTRON MICROSCOPY; SUBSTRATES
- Descriptors DEC
- CHEMICAL REACTIONS; DIELECTRIC PROPERTIES; ELECTRICAL PROPERTIES; ELECTRON MICROSCOPY; ESTERS; MICROSCOPY; ORGANIC COMPOUNDS; ORGANIC POLYMERS; PHYSICAL PROPERTIES; POLYMERS; RADIATIONS; SORPTION
Optional Information
- Copyright
- Copyright (c) 2014 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.