Isothermal Low Cycle Fatigue of Uncoated and Coated Nickel-Base Superalloys

High strength nickel-base superalloys have been used in turbine blades for many years because of their superior performance at high temperatures. However, the superalloys have limited oxidation and corrosion resistance and to solve this problem, protective coatings are deposited on the surface of the superalloys. The positive effect of coatings is based on protecting the surface zone in contact with hot gas atmosphere with elements like aluminium, chromium, which form a thermodynamically stable oxide layer that acts as a diffusion barrier to slow down the reaction between the substrate material and the aggressive environment. There are also other degradation mechanisms that affect nickel-base superalloys such as aging of microstructure, fatigue and creep. Long-term aging in metallic coating results in the changes of mechanical properties due to the significant interdiffusion of the main alloying elements between substrate and coatings. However, application of the coatings has mechanical side effects, the significance of which is not yet fully investigated. This work covers a study on the fatigue behaviour of a polycrystalline, IN792. and two single crystal nickel-base superalloys, CMSX-4 and SCB, coated with three different coatings. an overlay coating AMDRY997, a platinum aluminide modified diffusion coating RT22 and an innovative coating with an interdiffusion harrier of NiW called IC1, under low cycle fatigue loading conditions. Both low cycle fatigue properties, cyclic strain and stress response and fracture behaviour of the uncoated, coated and long-term aged coated specimens are presented. The main conclusions are that at 500 deg C the presence of the coatings have, in most cases, reduced the fatigue lives of the nickel-base substrates while at 900 deg C the coatings do improve the fatigue lives of the superalloys except RT22 coated on some superalloys and under certain test conditions. The reduction of the fatigue life at 500 deg C can be related to early cracking of the coatings below their ductile to brittle transition temperature (DBTT), where their surface roughness can act as notches affecting fatigue crack initiation. The beneficial effect of the coating at 900 deg C may be due to slower crack propagation caused by oxidation at the front of the crack tip. The tests also indicate that long-term aging influences the fatigue and fracture behaviour of coated superalloys by oxidation and diffusion mechanisms when compared to non-aged and uncoated samples. The aged samples exhibit longer life in some cases and shorter life during other test conditions. Fatigue cracks were in most cases initiated at the surface of the coatings, growing intergranularly perpendicular to the load axis