Published February 1992
| Version v1
Journal article
Stress intensity factors of a circumferential surface crack at the outside of a thermally loaded pipe
Description
Stress intensity factors were calculated for partly circumferential surface cracks at the outside of a pipe. The pipe is loaded by internal pressure and by thermal stresses. The weight functions method is used to calculate averaged weighted stress intensity factors at the deepest point and at the surface points of the crack. The evaluation of temperatures and stresses in the pipe and the application of the weight functions method are described. Numerical results are given for an application to steam generator tubes. (orig.)
Abstract (German)
Es wurden Spannungsintensitaetsfaktoren berechnet fuer Teilumfangsoberflaechenrisse an der Aussenseite eines Rohrs. Das Rohr wird durch Innendruck und Temperaturgradienten beansprucht. Mit Hilfe der Gewichtsfunktionsmethode werden gemittelte, gewichtete Spannungsintensitaetsfaktoren an der tiefsten Stelle und an den Oberflaechenpunkten des Risses berechnet. Die Ermittlung von Temperaturen und Spannungen im Rohr sowie die Anwendung der Gewichtsfunktionsmethode werden beschrieben. Es werden numerische Ergebnisse dargestellt fuer eine Anwendung bei Dampferzeugerheizrohren. (orig.)Additional details
Publishing Information
- Journal Title
- Materialwissenschaft und Werkstofftechnik
- Journal Volume
- 23
- Journal Issue
- 2
- Series
- Mater.wiss. Werkst.tech.
- Journal Page Range
- 67-70
- ISSN
- 0933-5137
- CODEN
- MATWE
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 23038621
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CRACKS; PIPES; STEAM LINES; STRESS INTENSITY FACTORS; SURFACES; THERMAL SHOCK; TIME DEPENDENCE
- Descriptors DEC
- PIPELINES