Metallographic investigations for examination of new manufacturing routes for cast and forged gas turbine blades after long term testing. Efficiency review
Description
The aim of this project as part of the Turbotherm project group 'Manufacturing of gas turbine blades' was to examinate new manufacturing routes for middle and last stage blades of land gas turbines by the results of metallographic investigations. These investigations were carried out on specimens of two cast and two forged nickel-base superalloys after static and cyclic long term testing (Nimonic 101 and Udimet 720). A damage map was made, which describes the failure conditions of creep rupture tested, low and high cycle fatigue tested and selected specimens. Special attention was given to the influence of middle stress on the crack growth behavior of high cycle fatigue tested samples. The results of the metallographic and fractographic investigations showed, that for the optimized structures the laws of damaging of the precipitation hardening nickel-base superalloys are reputed as. (orig./MM)
Availability note (English)
Available from TIB Hannover: F97B30+a.Abstract (German)
Das Ziel des Teilvorhabens der Turbotherm Vorhabengruppe 'Herstellung von Gasturbinenschaufeln' war, neue Herstellungstechnologien fuer Laufschaufeln der mittleren bis hinteren Reihen von stationaeren Gasturbinen durch metallkundliche Untersuchungen abzusichern. Diese Untersuchungen wurden an Proben aus Versuchsschaufeln zweier gegossener und geschmiedeter Nickelbasislegierungen nach statischer und dynamischer Langzeitpruefung durchgefuehrt (Nimonic 101 und Udiment 720). Es wurde ein Schaedigungsatlas erstellt, der die Versagenszustaende der bis zum Bruch geprueften Zeitstand-, HCF- und LCF-Proben beschreibt. Besondere Beachtung wurde dem Mittelspannungseinfluss auf den Bruchfortschritt bei HCF-Pruefung geschenkt. Die Ergebnisse der metallographischen und fraktographischen Untersuchungen haben gezeigt, dass auch fuer die optimierten Gefuegezustaende die Gesetzmaessigkeiten des Versagensablaufes der ausscheidungshaertbaren Nickelbasislegierungen gelten. (orig./MM)Additional details
Additional titles
- Original title (German)
- Metallkundliche Untersuchungen zur Absicherung neuer Herstellungstechnologien gegossener und geschmiedeter Gasturbinenschaufeln nach langzeitiger Beanspruchung. Erfolgskontrollbericht
Publishing Information
- Imprint Pagination
- 126 p.
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 28033222
- Subject category
- S36: MATERIALS SCIENCE;
- Resource subtype / Literary indicator
- Non-conventional Literature
- Descriptors DEI
- CASTINGS; CREEP; FATIGUE; FORGING; GAS TURBINES; METALLOGRAPHY; MICROSTRUCTURE; NIMONIC; UDIMET ALLOYS
- Descriptors DEC
- ALLOYS; CRYSTAL STRUCTURE; EQUIPMENT; FABRICATION; MACHINERY; MATERIALS WORKING; MECHANICAL PROPERTIES; NICKEL ALLOYS; NICKEL BASE ALLOYS; TRANSITION ELEMENT ALLOYS; TURBINES; TURBOMACHINERY
Optional Information
- Contract/Grant/Project number
- Foerderkennzeichen BMFT 0326501R
- Funding organization
- Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany).