Published June 2018
| Version v1
Journal article
On microstructural evolution and mechanical properties of Ti-5Al-5V-5Mo-3Cr alloy synthesised from elemental powder mixtures
Creators
- 1. Waikato Centre for Advanced Materials, School of Engineering, The University of Waikato, Hamilton 3240 (New Zealand)
- 2. EIGSI, 26 rue de Vaux de Foletier, La Rochelle 17041 (France)
Description
Highlights: • Ti-5553 alloy were successfully synthesised by powder compact extrusion of elemental powder mixtures. • The microstructure and composition distribution of the as-extruded Ti-5553 alloy were homogeneous. • Discontinuous grain boundary α, acicular α, fine particle α, lath α and globular α were formed after heat treatment. • The heat treated alloys had higher strength and ductility.
Availability note (English)
Available from http://dx.doi.org/10.1016/j.matchemphys.2018.03.007Additional details
Identifiers
- DOI
- 10.1016/j.matchemphys.2018.03.007;
- PII
- S0254058418301718;
Publishing Information
- Journal Title
- Materials Chemistry and Physics
- Journal Volume
- 211
- Journal Page Range
- p. 406-413
- ISSN
- 0254-0584
- CODEN
- MCHPDR
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 49096793
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- FINE PARTICLES; GRAIN BOUNDARIES; HEAT TREATMENTS; MIXTURES; POWDERS; TITANIUM ALLOYS
- Descriptors DEC
- ALLOYS; DISPERSIONS; MICROSTRUCTURE; PARTICLES; TRANSITION ELEMENT ALLOYS
Optional Information
- Copyright
- Copyright (c) 2017 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.