Simulation of radioactivation and chlorination reaction behavior for Zircaloy-4 and Zirlo cladding hull wastes

Radioactivation of Zircaloy-4 (Zry-4) and Zirlo cladding hulls after 55 GWD/tU burn-up and 10 years of cooling was simulated using the ORIGEN-S code. The simulation results revealed that 125Sb and 60Co are major contributors of both radioactivity and decay heat in the case of the Zry-4 hulls. For the Zirlo hulls, 93mNb and 125Sb consisted 82.2% of radioactivity while 125Sb and 60Co emitted 77.9% of decay heat. Although the radioactivity between the Zry-4 (1.17 Ci for 1 kg of fresh Zry-4) and Zirlo (1.38 Ci for 1 kg of fresh Zirlo) hulls was not significantly different, decay heat of the activated Zry-4 hulls (8.58 mW) was much larger than 1.62 mW of the activated Zirlo hulls. This gap might have come from the different major constituents of Zry-4 (Zr, Sn, Fe, and Cr) and Zirlo (Zr, Sn, Nb, and Fe) resulting in different radioactive nuclides after radioactivation. Chlorination reaction behavior of the activated Zry-4 and Zirlo hulls was performed using the HSC chemistry code. Constituents of recovered ZrCl4 were investigated via changes of Gibbs free energy and boiling points of resulting chlorides. The calculation results suggested that radioactivity and decay heat might decrease by 49.0 and 81.8%, respectively, in the ZrCl4 recovered from the activated Zry-4 hulls. In the case of Zirlo, it was expected that radioactivity and decay heat might decrease by 11.6 and 13.0%, respectively, after the chlorination reaction. Effect of cooling time on radioactivity and decay heat was also investigated. (author)