Electrical resistivity imaging for detection of hydrogeological active zones in karst areas to identify the site of mining waste disposal

Hydrogeological active zones found in mine waste (tailings) dumping sites are a major source of concern that threatens the safety of the environment and groundwater, especially in karstic areas. Therefore, detecting and identifying these regions correctly will help in selecting the appropriate sites for tailings disposal and avoid consequential environmental problems. In this study, electrical resistivity imaging (ERI) surveys with high-resolution data were carried out to detect hydrogeological active zones in an area proposed as a settling pond for mining tailings accumulated from El Mochito mine property, located in the north-western section of Honduras. Two-dimensional (2-D) inversion results of thirty-four survey lines revealed several zones of low resistivity. These zones indicate water-/clay-bearing regions that are structurally weak. However, some survey lines, the limestone beneath the surface is entirely compacted; as such, it is considered to be an ideal site for tailings pond construction. In addition, on the eastern side of the valley, there is a large chunk limestone layer that is compacted and can be considered for tailings pond construction. The ERI method provided insight and developed an informative subsurface map to detect the hydrogeological active zones, thus proving it as a beneficial tool used for selecting disposal sites for mining tailings in karstic areas.